Blagovne znamke
Vse prodajne uspešnice
  • Pasica

AVANTONE CLA 200 | STEREO STUDIO REFERENCE AMPLIFIER WITH 200W/CHANNEL (8 OHMS) AND CONVECTION-COOLED CHASSIS
  • AVANTONE CLA 200 | STEREO STUDIO REFERENCE AMPLIFIER WITH 200W/CHANNEL (8 OHMS) AND CONVECTION-COOLED CHASSIS
  • AVANTONE CLA 200 | STEREO STUDIO REFERENCE AMPLIFIER WITH 200W/CHANNEL (8 OHMS) AND CONVECTION-COOLED CHASSIS
  • AVANTONE CLA 200 | STEREO STUDIO REFERENCE AMPLIFIER WITH 200W/CHANNEL (8 OHMS) AND CONVECTION-COOLED CHASSIS

Avantone Cla 200 | Stereo Studio Reference Amplifier With 200w/channel (8 Ohms) And Convection-cooled Chassis

03525100
Avantone
999,00 €
Z davkom
Količina
Izdelek trenutno ni na zalogi

  • Varen nakup Varen nakup
  • Dostava naslednji dan Dostava naslednji dan
  • Možnost vračila Možnost vračila
Opis
Spletna stran proizvajalca AVALON

Avantone's High-performance Studio Reference Amplifier

Need a high-output, high-resolution amplifier for your passive studio monitors? We have just what you're looking for! The Avantone Pro CLA-200 Studio Reference Amplifier was designed to be paired with the company's CLA-10 studio monitors — however, it can be used with just about any demanding speaker load. Very low distortion, reliable performance under heavy professional use, and a transparent, open sound make the CLA-200 a solid choice for passive nearfield monitoring in discerning studios requiring high power output with no fan noise. The conservatively rated CLA-200 delivers over 200 watts into 8 ohms and can run at one-third power without thermal fault.

No-compromise build quality

A classically designed Class AB amplifier, Avantone builds the CLA-200 the old-school way, with no-compromise components in a rugged 2U convection-cooled chassis that visually complements the CLA-10 Studio Reference Monitors. Of course, the CLA-200 can be used with any passive studio monitors that require serious dynamic range. Avantone exercised meticulous care to create an amplifier in the traditional studio style, with generous VU meters, high-grade Japanese components, and a beefy toroidal transformer linear power supply.

No fan noise — ideal for control room installation

Meticulously designed into a standard 2U rackmount chassis, this amp can generate over 200 watts per channel into an 8-ohm load, making it perfect for medium-to-large speakers in a studio control room environment. The CLA-200 is convection cooled, so there's no fan noise — which makes it even better suited for control room installation.

Features:

  • Frequency response: 20Hz–20kHz, ±0.5dB
  • Output power: 300 watts (4 ohms), 200 watts (8 ohms), 500 watts (8 ohms, bridged)
  • Distortion: <0.05%
  • Signal to noise: >94dB
  • Input impedance: 20k ohms (balanced), 10k ohms (unbalanced)
  • Damping factor (100Hz, 8 ohms): 250 SNR (A-weighted): >103dB
  • Amplifier type: Class AB
  • Slew rate (at 1kHz): 28V/µs
  • Input sensitivity (1kHz): 0.775 volts (0dBu)
  • THD (1kHz): <0.1%
  • Intermodulation distortion (at 1kHz, 10% rated power): <0.1%
  • Crosstalk: -70dB

Podrobnosti izdelka
03525100
4 drugi izdelki v isti kategoriji:

Ste našli v konkurenčni trgovini boljšo ponudbo?

Predlagajte vašo ceno

Naša cena: 999.00 €

 

* Potreben vnos

Vašo ponudbo bomo preučili in vam odgovorili v najkrajšem možnem času.

Pošlji sporočilo


Avantone Cla 200 | Stereo Studio Reference Amplifier With 200w/channel (8 Ohms) And Convection-cooled Chassis

Avantone Cla 200 | Stereo Studio Reference Amplifier With 200w/channel (8 Ohms) And Convection-cooled Chassis

Od nas ne boste dobili nezaželjene pošte

Kaj lahko storimo za vas ?

Izbrano za Vas

Follow us on Facebook