Blagovne znamke

Referenca: 27942100

Blagovna znamka: Kali Audio

Kali Audio Lp-6 | 80w 2-way Powered Studio Monitor

KALI Audio je bil ustanovljen leta 2018 s strani talentiranih profesionalcev, entuziastov in vizionarjev v avdio industriji (velik del JBL avdio inženirjev). Vsi njihovi produkti so projektirani v Kaliforniji (ZDA) z namenom in rezultatom, da se uporabnikom njihovih monitorjev nudi najboljša avdio izkušnja, kar jo lahko ponudijo. Njihove monitorje...

Cena 169,00 € Redna cena 216,67 €
Več
Dobavljivo takoj

Referenca: 40560103

Blagovna znamka: Native Instruments

Native Instruments Traktor Kontrol S2 Mk3 | Complete 2-deck Usb Dj Control Surface, Audio Interface, And Software System For Mac

Odličen 2-kanalni DJ kontroler Native Instruments Traktor Kontrol S2 MK3 z integrirano USB zvočno platformo (24-bit/48-kHz). Tretja generacija Native Instrumenst DJ kontrolerjev v novi verziji prinaša večji (14 cm) jog wheel kontroli za boljši in lažji nadzor ter dva načina kontrolnega delovanja (Jog Mode in Beatgrid Mode), RGB obarvane pad-e za boljši...

Cena 243,00 € Redna cena 319,74 €
Več
Dobavljivo takoj
Vse prodajne uspešnice
  • Pasica

  • Znižana cena
Behringer Nx 6000 | Ultra-lightweight 6000 Watt Class-d Power Amplifier With Smartsense Loudspeaker Impedance Compensation
  • Behringer Nx 6000 | Ultra-lightweight 6000 Watt Class-d Power Amplifier With Smartsense Loudspeaker Impedance Compensation
  • Behringer Nx 6000 | Ultra-lightweight 6000 Watt Class-d Power Amplifier With Smartsense Loudspeaker Impedance Compensation
  • Behringer Nx 6000 | Ultra-lightweight 6000 Watt Class-d Power Amplifier With Smartsense Loudspeaker Impedance Compensation

Behringer Nx 6000 | Ultra-lightweight 6000 Watt Class-d Power Amplifier With Smartsense Loudspeaker Impedance Compensation

04025194
Behringer
357,61 €
329,00 € Popust 8%
Z davkom
Količina
Dobavljivo po naročilu

  • Varen nakup Varen nakup
  • Dostava naslednji dan Dostava naslednji dan
  • Možnost vračila Možnost vračila
PayPal
Opis
Spletna stran proizvajalca BEHRINGER

The NX6000 power amplifier packs 6000 Watts (2 x 3000 Watts @ 4 Ohms; 2 x 1600 Watts @ 8 Ohms) into exceptionally lightweight (13 lbs / 5.9 kg) and rack-mountable packages. And because the NX6000 is so much more efficient than conventional designs, it runs cooler and doesn’t require the massive heat sinks and heavy toroid transformers typically associated with its conventional counterparts. Thanks to our “Zero-Attack” limiters that offer maximum output level with exceptionally-reliable overload protection and SmartSense Loudspeaker impedance compensation, which provides fully linear frequency response at any speaker load impedance, you can run the NX6000 full-out for hours on-end. Our revolutionary high-density Class-D technology, combined with an ultra-efficient, switch-mode power supply ensure this feather-light powerhouse will drive your rig effortlessly for many years to come.

Class-D - Massive Power, Perfect Sound

Thanks to our High-Density Class-D amplifier Technology, we are able to provide you with enormous power and incredible sonic performance in an easy-to-use, ultra-portable and lightweight package. Class-D amplification makes all the difference, offering the ultimate in energy efficiency – and eliminating the need for heavy power supplies and massive heat sinks. This amazing technology makes it possible to design and build extremely-powerful products that are significantly lighter in weight than their traditional counterparts, while using less energy and protecting the environment.

Sublimely Simple Operation

The front panel controls and indicators provide your system’s vital signs at a glance. After pressing the Power button, the Power LED lights to show the amp is ready for action. All channels feature positive-detent Gain controls with Signal LEDs that light when a signal is present, as well as Limit LEDs to indicate when the amplifier is running at full capacity. Just as elegant as the front, the rear panel is home to the combo XLR and 1/4" TRS Input connectors, making the NX6000 compatible with virtually any source, balanced or unbalanced. Professional twist-lock speaker sockets are provided to ensure every drop of output power gets to your loudspeakers.

The rear panel is also where you’ll find the switches that enable the NX6000 amp to run in your choice of dual mono or stereo modes. The NX6000’s built-in Crossover switch sets the amp to Full-Range mode, where the output is sent unfiltered to your loudspeakers, or Bi-amp mode, which sends only the low-frequency content (<100 Hz) to passive subwoofers, while the high-frequency content (>100 Hz) is channeled to your full-range loudspeakers.

SmartSense Impedance Compensation

Our new SmartSense Technology puts the punch back into Class-D amplification, providing vastly improved full-range frequency response with more powerfully-dynamic bass, and smoother high-frequency reproduction. The resulting output is no longer dependent on the actual load, but is rendered perfectly ruler flat via impedance compensation. NX6000’s design also incorporates a significantly-higher damping factor that yields better amplifier control over the loudspeaker for stronger audio reproduction – especially in the LF area.

Sound Value

Sporting massive output ratings, lightweight Class-D technology and an equally lightweight price tag – plus all the amenities a professional audio engineer could ask for – the BEHRINGER NX6000 power amplifier is a serious amp for your most demanding applications.

Experience the BEHRINGER NX6000 amplifier at your local dealer, or get yours online today, and find out why more and more professionals are turning to BEHRINGER amplifiers for their superb performance and extraordinary value.

Features

  • Delivers 2 x 3000 Watts into 4 Ohms; 2 x 1600 Watts into 8 Ohms and weighs less than 13 lbs / 5.9 kg
  • Ultimate reliability through revolutionary cool-running High-Density Class-D technology with "near-zero" thermal buildup
  • Ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption
  • Built-in stereo crossover with low-cut, high-cut and full range mode
  • SmartSense Loudspeaker impedance compensation features fully linear frequency response at any speaker load impedance
  • "Zero-Attack" limiters offer maximum output level with reliable overload protection
  • Detented gain controls for precise level setting
  • Precise 4-segment Signal and Limit LEDs to monitor performance
  • XLR and 1/4'' TRS combination input connectors for compatibility with any source
  • Professional twist-lock speaker connectors for ultimate reliability
  • Independent DC, LF and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show
  • “Back-to-front” ventilation system prevents thermal buildup for reliable operation

Podrobnosti izdelka
04025194
4 drugi izdelki v isti kategoriji:

Ste našli v konkurenčni trgovini boljšo ponudbo?

Predlagajte vašo ceno

Naša cena: 329.00 €

 

* Potreben vnos

Vašo ponudbo bomo preučili in vam odgovorili v najkrajšem možnem času.

Pošlji sporočilo


Behringer Nx 6000 | Ultra-lightweight 6000 Watt Class-d Power Amplifier With Smartsense Loudspeaker Impedance Compensation

Behringer Nx 6000 | Ultra-lightweight 6000 Watt Class-d Power Amplifier With Smartsense Loudspeaker Impedance Compensation

Od nas ne boste dobili nezaželjene pošte

Kaj lahko storimo za vas ?

Follow us on Facebook