It has never been this easy to achieve stunning sonic results in a huge variety of venues.
WLA-112A
-
Active with DSP & FIR filters
-
12″ Coaxial Beyma driver
-
680 W Continuous
-
1360 W Peak
-
4.0″ LF voice coil
-
2.87″ HF voice coil
-
139 dB System Peak SPL
Around the back of WLA-112A and WLA-115A are all the connections and control interfaces needed for a tidy system.
Select between 8 DSP presets with FIR filters and control the system remotely with the RS485 network facility.
The 12” and 15” elements use coaxial drivers from Beyma – which are manufactured in Europe.
This coaxial design gives consistent coverage on both Horizontal and Vertical planes – while competitive traditional two-way line arrays do not have consistent coverage in one axis at least by design.
WLA-112A and WLA-115A coaxial design gives consistent coverage and is unique. (Well, except for our own Wharfedale Pro WLA-1 passive models)
WLA-1A System gives constant coverage on both Horizontal and Vertical planes
|
Model Name |
WLA-112A |
|
System Typology |
Hybrid Curvature Array |
|
System Type |
Active 12″ coaxial Bi-Amplified |
|
Configuration |
two-way |
|
Frequency Response (+/-3 dB) |
55 Hz – 20 KHz |
|
Frequency Range (- 10 dB) |
35 Hz – 25 KHz |
|
Sensitivity 2.83 V/1 m |
101 dB |
|
Calculated Maximum SPL @ 1 m |
133 dB |
|
System Peak SPL |
139 dB** |
|
* |
|
** |
level at 1 m under free field conditions using pink noise with crest factor 4, with dedicated preset. |
|
Waveguide Type |
EVO-Fold® |
|
Nominal Coverage (H x V) |
100° x 20° |
|
Signal Processing |
DSP based, 8 FIR presets |
|
Preset list |
A) 1 to 2 SPKR 100 Hz HPF
B) 3 to 4 SPKR 100 Hz HPF
C) 5 to 6 SPKR 100 Hz HPF
D) 1 SPKR
E) 2 SPKR
F) 3 to 4 SPKR
G) 5 to 6 SPKR
H) CUSTOM |
|
Amplifiers |
|
Amplifier Design |
Class D |
|
Power Rating: |
1360 W Peak (1200 W LF +
160 W HF), 680 W Continuous
(600 W LF + 80 W HF) |
|
Thermal Protection |
Amplifier Shut Down. Auto Reset |
|
Low Line Voltage Shut Down |
60% Nominal Line Voltage |
|
Driver Protection |
Independent LF/ HF RMS and Peak Limiters |
|
DC and Short Protection |
Yes |
|
Clip Limiter |
Yes |
|
Limiter Indicator |
Red LED |
|
Signal Indicator |
Green LED |
|
Power/Active Indicator |
White LED |
|
Find Function Indicator |
Blue LED |
|
Input Sensitivity |
+4 dBu |
|
Maximum Input Level |
+18 dBu |
|
Input Impedance |
Balanced:10 KΩ |
|
AC Power details – Power Supply |
High Efficiency Dual Switching Mode Power Supply |
|
Connectors |
|
Input Connector |
Balanced socket XLR |
|
Link Connector |
Balanced pin XLR |
|
UPDATE |
USB Type B |
|
NETWORK (RS485) |
RJ45 |
|
AC Power Options |
AC 100-120 V~ and 220-240 V~, 50/60 Hz Automatic |
|
Special Features |
Copper Demodulating rings in both LF and HF units |
|
Waterproof LF cone |
|
Shared High performing Ferrite magnet system design |
|
Rigging & Hardware: |
3 points for rigging |
|
Vertical Splay angle range: |
0°- 5° – 10° – 15° |
|
Horizontal Splay angle |
15° |
|
Accessories: |
WLA-1 FLY FRAME |
|
Stand pole: |
Dual Angle -2.5° / +7.5° |
|
Handles: |
2 side / 2 back |
|
Enclosure |
|
Cabinet Type |
Trapezoid |
|
Enclosure Material and finish |
15 mm plywood / Rhino Rock |
|
Colour |
Black paint |
|
Grille Material & Finish |
Powder coated perforated steel |
|
Dimensions – Unpacked: |
|
Height Front |
332 mm / 13.1″. |
|
Height Rear |
246.4 mm / 9.7″. |
|
Width |
566 mm / 22.3″ |
|
Depth |
465 mm / 18.3″ |
|
Dimensions – Packed: |
|
Height |
661 mm / 26.0″ |
|
Width Front |
550 mm / 21.7″ |
|
Width Rear |
550 mm / 21.7″ |
|
Depth |
410 mm / 16.7″ |
|
Weight |
|
Net Weight |
30.4 kg / 66.9 lbs |
|
Gross Weight |
32.8 kg / 72.2 lbs |