Features
-
18″ passive subwoofer
-
All new LF driver
-
4.0″ voice coil
-
Aluminium basket design
-
35mm pole socket plus 2 side handles
-
Max SPL @ 1 meter 139 dB
-
1000 w AES (RMS)
-
2000 w Program
-
4000 w Peak
NEW SUBWOOFER DRIVER
The driver inside the Reason-X subwoofer has some very special features.
-
∮102.6 diameter voice coil. (Thats OVER 4.0″ but we say 4.0″ because of number rounding)
-
Double-layer spider bonding: Updated mute glue is used. This bonding can eliminate brittle cracking and reduces harmonic distortion.
-
112 g Membrane: The Reason-X subwoofer driver has a heavier membrane which can withstand more power without breaking.
-
31 mm voice coil cavity: A larger internal cavity for the coil windings allows Reason-X to have lower response by 5 Hz.
-
6.2 ohm impedance: The impedance peak is higher in the Reason-X driver at 35 Hz. This results in superior low end strength.
Specifications
-
System Type: Passive
-
Configuration: Single Subwoofer
-
Frequency Response (+/-3 dB): 35-1 Khz
-
Frequency Range (-10 dB): 30-800 HZ
-
Sensitivity 2.83 V / 1 Meter: 103 dB
-
Calculated Maximum SPL @1 Meter: 139 dB
-
System Rated Impedance: 8 Ω
-
Low Frequency Transducer Size: 470 mm / 18"
-
Voice Coil Size: 102 mm / 4"
-
LF Magnet Material: ferrite
-
LF Frame Material: Aluminium
-
Rated Impedance: 8 Ω
-
LF Power re:AES2-2012: 1000 W
-
System AES (RMS) Power (W): 1000 W
-
System Programme Power (W): 2000 W
-
System Peak Power (W): 4000 W
-
Crossover Frequency:
-
Input Connector: 2 x speakON compatible
-
Rigging: No
-
Handles: 2 on Sides
-
Enclosure: 35 mm pole socket
-
Cabinet Type: square
-
Enclosure Material and finish: 18 mm plywood
-
Colour Options: Black paint
-
Grille Material & Finish: Steel
-
Height: 600 mm / 23.6"
-
Width Front: 560 mm / 22.0"
-
Width Rear: 560 mm / 22.0"
-
Depth: 756 mm / 29.8"
The Reason-X subwoofer driver has a heavier membrane which can withstand more power without breaking.