TASCAM’s Sonicview series represents a bold new era for the company’s long-standing line of digital mixers, boasting a stunning combination of cutting-edge TASCAM technology, ultra-high-definition audio, and an unprecedented level of configuration control. Dual 7-inch touchscreen interfaces offer a highly customizable experience, boasting TASCAM’s innovative 3-mode VIEW technology to dial in each touchscreen to your preferred workflow needs. Next, an incredible FPGA mixer engine, 96kHz sampling, 54-bit float internal processing, and 32-bit ADC deliver a level of audio quality far beyond your typical digital mixer while the top-of-the-line HDIA mic preamps capture your signal with a studio-quality sheen. Top it all off with full Dante networking functionality, a built-in multichannel USB audio interface, 32-channel SD recording, and a veritable library of bus configuration and processing possibilities, and the Sonicview 16XP is an absolute powerhouse of a digital mixer that’s all but guaranteed to become the centerpiece of your setup.
Configurable TASCAM VIEW interface
While the TASCAM Sonicview 16XP’s dual 7-inch touchscreens are impressive in their own right, what makes this mixer to the next level is TASCAM’s powerful yet intuitive Visual Interactive Ergonomic Workflow (VIEW). This system allows you to instantly configure your Sonicview’s screens to best suit your needs, with three different modes: Module View, Individual View, and Channel Strip View. Best of all, both screens are entirely independent of each other and can be simultaneously set to two different views.
-
Module View: This view homes in on a single channel, allowing you to control and view any two sets of parameters, from the compressor to the graphic EQ to the effects send, and more.
-
Individual View: Ideal for those who value overall customization, this view gives you the power to monitor any function of any channel, channel grouping, or more on different screens at the same time.
-
Channel Strip View: Similar to a traditional analog mixer, Channel Strip View displays an overview of any eight adjacent channels and offers control of your preferred parameters.
Ultra-high-fidelity audio quality
The Sonicview’s 54-bit float-point FPGA mixing engine, 32-bit/96kHZ sampling, and 32-bit AD/DA conversion mark a new era for TASCAM digital mixers, providing the ideal balance of high-definition audio performance and low power consumption. Moreover, Sonicview’s FPGA mixing engine keeps latency to a minimum, while float-point processing allows you to modify levels without a drop in resolution. It adds up to an exceptionally powerful mixer with pro-grade performance, even when running Dante networks or inline monitoring systems.
Top-quality Class 1 HDIA mic preamps
One of the Sonicview series’ greatest assets is its implementation of world-renowned TASCAM Class 1 High Definition Instrumentation Architecture Preamps (HDIA). TASCAM tells this design is simply the finest microphone preamp they’ve ever created. Boasting superior EIN, incredible signal-to-noise and distortion ratio, and top-class frequency response, HDIA preamps put the subtlety and power of a prestigious studio mic preamp in your hands. Finally, the mic inputs can easily handle signals up to +32dBU for excellent headroom and to accommodate unexpected level jumps.
Versatile 32-in/32-out built-in audio interface
Whether you’re working in broadcast, live sound, or standard studio applications, the Sonicview’s built-in audio interface makes it a formidable choice for all manner of traditional recording duties. The Sonicview’s ease of use and intuitive controls make it a breeze to record your preferred configuration of flex buses, channel direct outs, and the L/R main bus to any DAW, with high-quality fidelity up to 96kHz and 32-bit precision. Plus, while this mixer features standard USB-to-PC functionality, the Sonicview 16XP also features an integrated SDXC slot to save 32 channels straight to a card — you can even plug in a good old-fashioned USB flash drive into the top panel.
64-in/64-out Dante functionality
The Sonicview 16XP offers full Dante audio-over-IP functionality for enhanced networking and superior control. Boasting a built-in 64-in/64-out Dante interface with Dante Domain Manager support, the Sonicview 16XP can efficiently serve as the control center for your venue’s Dante framework. Finally, the Sonicview features two Dante ports to enable redundant streams and AES67 and SMPTE ST 2110 interoperability.
Features:
-
32-track recorder and digital mixer with ultra-high audio quality and near-limitless configuration options
-
Dual 7-inch touchscreen panels with TASCAM VIEW interface
-
44 input channels (or 40 mono input channels and 2 stereo input channels) with 4X return for incredible flexibility in your setup configuration
-
22 versatile output buses, in addition to a main L/R bus with 31-band graphic EQ to shape your sound
-
Ultra-high-fidelity 96kHz, 54-bit float-point FPGA mixing engine
-
Exceptionally low 0.51ms analog-to-analog latency
-
16+1 100mm motorized faders for superior control
-
Crystal-clear 32-bit/96kHz AD/DA conversion
-
Premium TASCAM Class 1 HDIA microphone preamplifiers deliver a studio-quality sheen
-
Full 32-in/32-out, 32-bit/96 kHz USB audio interface functionality for effortless recording and enhanced control
-
Built-in SDXC recorder allows you to capture all 32 channels straight onto an SDXC card
-
Full 64-in/64-out Dante interface for enhanced networking possibilities
-
16 mic/line inputs (with up to +32dBu) easily accommodate a wide variety of different live and recording situations
-
4 multi-effects processors to fine-tune your audio
-
Optional TASCAM Sonicview Control software makes remote control and off-line editing a breeze
-
2 TASCAM expansion slots (one pre-installed with an SDXC multi-track recorder) to expand MADI, Dante, AES/EBU, and analog output functionality
-
Can be integrated into a rack with optional AK-RMSV16 rack mount kit