Put a Mackie DL32SE in your rack, fire up your tablet, and you can mix from anywhere using Mackie’s Master Fader SE control app. And despite the wireless convenience, you’ll make zero sonic sacrifices, courtesy of 32 great-sounding Onyx+ preamps and onboard digital effects. The DL32SE also doubles as a high-quality 32-in/32-out USB interface, so you can record the show at the venue and then take it to the studio for mixdown. You can also play back a full multitrack recording for a virtual soundcheck. Moreover, the DL32SE supports up to 20 tablets at once, so multiple engineers can work from one mixer. No matter where you’re mixing from, the DL32SE gets you into your mix like never before.
Leave that bulky snake at home! Because you can control the Mackie DL32SE with your tablet, you can place it anywhere. Even if the DL32SE is onstage, you can walk around the venue to fine-tune your mix. It’s a great way to ensure optimal sound quality for every member of your audience. And because the DL32SE supports up to 20 tablets at once, multiple engineers can work from one DL32SE. You can even set up personal mixes for each performer that are tweakable via any iOS device. Back in the day, you would have needed miles of cable and a pile of submixers to pull off this much signal routing. But with the DL32SE in your rack, all you need is a router, a tablet, and your fingers!
With the Mackie DL32SE in your live rig, you’ll never run short of I/O. Providing you with 32 stereo-linkable input channels, 10 fully assignable XLR outputs, and 32 great-sounding Onyx+ mic preamps, the DL32SE has your I/O needs covered. Of the 32 input channels, 16 are XLR jacks, 16 feature XLR/TRS combo jacks, and two include hi-Z inputs. On top of that, you also get 15 output buses, eight stereo-linkable aux sends, six stereo-linkable subgroups, a Main L/R bus, and a headphone output. Best of all, the DL32SE gives you total recall of your settings!
One of the Mackie DL32SE’s most valuable features is multitrack recording and playback. Use the DL32SE as an audio interface to record straight to your DAW. Play intermission music, backing tracks, and more. Play back your full multitrack recording for a virtual soundcheck. You can also use your DAW’s audio plug-ins in a live environment. The DL32SE is a value-packed, high-channel-count studio recording solution.
Packed with DSP, the Mackie DL32SE gives you 32 input channels with per-channel EQ, filters, gate, compression, and an RTA/spectrograph, as well as 15 output buses with a 4-band parametric EQ, highpass and lowpass filters, 31-band graphic EQ, compressor/limiter, and alignment delay. On top of that, you also get studio-quality reverbs, delays, chorus, and more. With four stereo effects buses with dedicated sends and returns, full I/O routing with A/B sources per channel, and modern and vintage options for each processor, churning out polished, pro-quality mixes is no problem.
The Mackie DL32SE supplies 32 channels of powerful digital mixing. You get wireless control over everything, including its processing and routing, via Mackie’s Master Fader SE control app. The DL32SE is tailor-made for live sound engineers who demand flexible wireless mixing. So, whether you work in a theater, house of worship, or concert hall — if you’re serious about live sound, you owe it to yourself to check out the DL32SE.
Features:
-
Ample I/O including 32 stereo-linkable input channels, 10 fully assignable XLR outputs, 15 output buses, 8 stereo-linkable aux sends, 6 stereo-linkable subgroups, a Main L/R bus, and a headphone output
-
16 input channels are XLR jacks, 16 feature XLR/TRS combo jacks, and 2 include hi-Z inputs
-
32 recallable Onyx+ mic preamps deliver top-notch sound
-
Wireless mixing allows you to take control of your mix via a tablet
-
Tweak your mix, processing, and routing from anywhere in the venue
-
Supports up to 20 tablets at once to accommodate multiple engineers
-
4 onboard FX processors with dedicated sends and returns create polished, professional-sounding mixes
-
32-in/32-out USB interface for recording straight to your DAW
-
Play intermission music, backing tracks, and more
-
Play back your full multitrack recording for a virtual soundcheck
-
Use your DAW’s audio plug-ins in a live environment