The EBS-MB3 is a preamp with two channels, produced using high-end materials and parts. You’ll have plenty of headroom to play with as the preamp works at a signal level that is equal to a pro mixing console. This higher signal means you can use it as a preamp alongside any type of standard power amp.
Useful Built-In Tools
A number of in-built features separate the EBS-MB3 from the rest. The two contrasting channels (drive and clean) can be used either parallel or in series. The dual balanced XLR-Outputs can tap the signal post and pre-EQ simultaneously, while 10 M Ohms of Input Impedance let it handle absolutely any kind of bass. An onboard tuner means you can tune without needing another device. This is a seriously versatile piece of kit!
Features
-
Professional, Analogue Preamp
-
Dual Channels (Overdrive & Clean)
-
Blend Control (for Drive)
-
Run Either in Parallel or Series
-
Dual Balanced XLR-Out (Pre & Post EQ or Stereo)
-
Effects Loop (Mono or Stereo) – Running in Stereo Mode the Balanced Outputs Become Left & Right Output
-
Character and Bright Filters (Clean Channel)
-
HI or LO Gain Drive Engines
-
Thin or Deep Type (Drive Channel)
-
Onboard Compressor
-
Tuner, Aux Input
-
Headphones Out
-
10 M Ohms Input Impedance
-
9V DC, 450 mA Required (Power Supply is Included)
Specifications
General:
-
Weight: 660g (1.5lbs)
-
Dimensions (W x D x H): 6.6" x 4.9" x 2.1"
Aux Info:
-
Power Requirements: Idle 450mA @9V. Max 750mA @ 9V (with Headphones at Max Output Level
Balanced Outputs:
-
Options: Pre/Post EQ, L/R Channel in Stereo Mode
-
XLR Connections: 1-GND, 2-Hot, 3-Cold
-
Output Level: Nominal -20dBv
Output:
-
Output Impedance: <1 k Ohms
-
Signal Level: Nominal 0 dBv
Aux Input:
-
Input Impedance: 20 k Ohms
-
Nominal Level: -10 dBv
Phones Out:
-
Recommended Impedance: 32 – 200 Ohms
Effects Loop:
-
Input Impedance: > 200 k Ohms // 22 pF
-
Output Impedance: < 100 Ohms
-
Gain: Unity (1:1)
-
Loop Signal Level: Nominal -10 dBv
Drive Channel:
-
Input: Input Impedance 1.8 M Ohms // 22 pF
-
Drive: Gain Range 40 dB
-
Engines: Lo: Type 2nd Harmonics Soft, Hi: Type Symmetrical 2-Stage with +18 dB Gain
-
Type: Thin/Normal/Deep Pre-Drive EQ
-
Filter Section: Tone Filter: Type 6 dB/Oct. Low Pass. Frequency Range 700-20k Hz. Middle Filter: Type Bandpass Filter. Frequency Range 100 – 4.500 Hz. Q 1.2, Gain Range +/- 15 dB
Clean Channel:
-
Input Impedance: Parallel Mode 1.5 M Ohms // 44 pF, Serial Mode 10 M Ohms // 22 pF
-
Gain: Gain Range min/max -00/ +30 dB, Gain Peak LED +10 dBv, Frequency Response +0 / -3 dB 20 – 20.000 Hz
Character:
-
Filter Type: Shelving High/Low Pass
-
Gain: Lo +6 dB @ 80 Hz, Mid -2 dB @ 900 Hz, Hi +3 dB @ 7.5 kHz
Bright:
-
Filter Type Shelving: Gain +10 dB @ 10 kHz
Filter Section:
-
Bass Filter: Type 12 dB/oct. Shelving. Gain Range +/- 18 dB @ 60 Hz
-
Middle Filter: Type Bandpass Filter. Freq Range 50 – 5.000 Hz. Q -Boost 0.5 – 1.3, Q – Cut 0.5 >5. Gain Range +/- 12-15 dB
-
Treble Filter: Type Shelving. Gain Range +/- 18 dB @ 8 kHz
-
Comp/Limit: Comp Gain 0 Db. Attenuation Max 24 dB, Compression Ratio Max 3:1, Attack (80%) typ <10 ms, Release (80%) typ 100 ms