Avantone Ck-6Classic | Large-diaphragm Condenser Microphone

159,00 € MPC: 283,00 € (-44%)
Takoj na voljo Na zalogi v: Krško
Količina:
dodaj v košarico Dodaj na seznam želja

je zasnovan za resnično profesionalno delovanje. Zasnovo, značaj in zmogljivost je mogoče neposredno primerjati s finimi studijskimi standardnimi FET mikrofoni, vendar za delček njihove cene. Robustno ohišje mikrofona Avantone CK-6 in sklop kapsule sta natančno obdelana iz medenine. Estetsko se ponaša z elegantnim zaključkom Cabernet Wine-Red, poudarjenim z obrobo iz poliranega niklja in sklopom kapsule. Diskretno FET vezje razreda A brez transformatorja bo prineslo prijetne profesionalne rezultate, primerljive z veliko dražjimi modeli. CK-6 vsebuje 32 mm zlato napršeno tanko Mylar kapsulo. CK-6 v svoji običajni standardni različici uporablja visokokakovostne kondenzatorje iz polistirena in metaliziranega polipropilena v zvočni poti. Vsak studio lahko s ponosom ponudi CK-6 za instrumentalno in vokalno mikrofoniranje. Izžareva razred tako vizualno kot zvočno. Izdelano z uporabo najboljših materialov, ki dajejo zelo trden občutek, vrhunsko strukturno celovitost in robustno zanesljivost. Vsestranski mikrofon CK-6 lahko ustvari profesionalne rezultate s čistim zvočnim značajem. Priložen Custom Retro Shockmount je odličen pri omogočanju natančnega pozicioniranja mikrofona, hkrati pa preprečuje prenos neželenih tresljajev navzgor v mikrofon. Ta izolacija omogoča vrhunske profesionalne rezultate. CK-6 ima ločena stikala -10 dB pad & 80 Hz LF roll off. Stikalo za dušenje -10dB lahko vključite, ko mikrofonirate vire z zelo visokim SPL, da preprečite preobremenitev elektronike. Stikalo visokoprepustnega filtra 80 Hz lahko vklopite, da zmanjšate hrup in preprečite, da bi nezaželene nizke frekvence "umazale" stezo.

0 ocen

Ste kupili ta izdelek?
Napišite nam svoje mnenje.

OPIS IZDELKA

Large-diaphragm Cardioid FET Condenser Microphone with Transformerless Class A Circuitry, Highpass Filter, and 10dB Pad

Pro audio experts may have seen (and heard) it all, but every once in a while a product comes along that shatters the conventional price-to-performance paradigm. Enter the Avantone CK-6. It's a large-diaphragm cardioid FET condenser microphone that looks and sounds expensive, but it's not. That's the idea behind Avantone's Cabernet Series mics, that, performance-wise, go toe-to-toe with microphones costing much more. If you only saw its price, you might assume that Avantone cut corners somewhere. You'd be mistaken. First off, the CK-6 is built for the long haul, with a body and capsule assembly of precision-machined brass.

Quality components throughout

Under the hood, the CK-6 is equally impressive, featuring discreet, transformerless Class A FET circuitry and a thin gold-sputtered Mylar capsule. Avantone has even used high-grade polystyrene and metalized-polypropylene capacitors in the audio path — normally the kind of "upgrade" components installed by extreme hot-modders. The CK-6 is an all-around studio workhorse, ideal for clearly capturing the sonic character of just about any vocal or instrument. Did we mention how gorgeous the CK-6 is? Its elegant wine-red finish and polished-nickel trim will certainly attract attention whenever anyone sets foot in your studio.

Fully featured, and ready to record

Aside from not having multiple polar patterns (and who in their right mind would expect that in a microphone at this price?), Avantone didn't skimp on the features, either. The CK-6 boasts a 10dB pad, so you can use it on drums, guitar cabinets, and other boisterous sources. It also has an 80Hz highpass filter to attenuate rumble and other unwanted low frequencies. The Avantone CK-6 is an amazing value. At this price, you can easily afford a stereo pair. How about five of them for your toms and overheads?

Features:

  • Fixed cardioid polar pattern
  • Discreet, transformerless Class A FET circuitry
  • Single-sided 32mm center-terminated gold-sputtered Mylar (6 micron) capsule
  • Ideal for studio vocals, acoustic guitar, drum overheads, piano, and more
  • Frequency response: 35Hz-20kHz ±3.5dB
  • Output impedance: <=200 ohms
  • Maximum SPL: 136dB (0.5% THD @1000Hz)
  • Equivalent noise level: <17dB
  • Highpass filter: 80Hz (6dB/octave)
  • 10dB attenuation switch
  • Power: 48 Volt phantom / 5mA
  • Body and capsule assembly made of precision-machined brass
  • Elegant Cabernet Red finish with polished-nickel trim
  • Includes custom retro shockmount

S pritiskom gumba “Potrdite”
se obvežete za nakup artikla, če bo vaša ponudba najvišja.

Izdelek:
Aktualna ponudba:
Vaša ponudba:

V primeru, da odstopite od nakupa, ima Audio Pro d.o.o. pravico izterjave sredstev od kupca (po potrebi tudi po sodni poti).

Komentarji kupca

Izdelek je dodan v košarico

Količina: