ATM75cW
Terminated with locking 4-pin connector for A-T UniPak® body-pack wireless transmitters. 55" (1.4 m) cable. Includes windscreens.
With a pivot-mounted flexible mic boom that descends from either the left or right side, the ATM75 delivers professional-quality vocal pickup with hands-free operation. The belt-mounted power module operates on either battery or phantom power.
-
Professional-quality vocal pickup with hands-free operation
-
Low-visibility headband provides stable, comfortable fit
-
Pivot-mounted flexible mic boom descends from left or right side
-
Belt-mounted power module operates on battery or phantom power
-
Cardioid polar pattern improves isolation of desired sound source
-
Also available as: ATM75cW - less power module; 55" (1.4 m) cable terminated with locking 4-pin connector for A-T UniPak wireless systems
Specifications
-
Element: Fixed-charge back plate, permanently polarized condenser
-
Polar Pattern: Cardioid
-
Frequency Response: 100-13,000 Hz
-
Low Frequency Roll Off: 80 Hz, 18 dB/octave
-
Open Circuit Sensitivity: PHANTOM: -51 dB (2.8 mV) re 1V at 1 Pa BATTERY: -53 dB (2.2 mV) re 1V at 1 Pa
-
Impedance: PHANTOM: 200 ohms BATTERY: 270 ohms
-
Maximum Input Sound Level: PHANTOM: 132 dB SPL, 1 kHz at 1% T.H.D. BATTERY: 121 dB SPL, 1 kHz at 1% T.H.D.
-
Dynamic Range: PHANTOM: 96 dB, 1 kHz at Max SPL BATTERY: 85 dB, 1 kHz at Max SPL
-
Signal to Noise Ratio: 58 dB, 1 kHz at 1 Pa
-
Phantom Power Requiremens: 11-52V DC, 2 mA typical
-
Battery Type: 1.5V AA/UM3
-
Battery Current Life: 0.4 mA / 2000 hours typical (alkaline)
-
Switch: Off, on-flat, on-roll-off
-
Cable: 4.6' (1.4 m) long (permanently attached to microphone), 0.11" (2.8 mm) diameter, 2-conductor shielded cable with TA3F-type connector
-
Accessories: AT8531 power module; AT8439 clothing clip; AT8139L large windscreen; AT8139S small windscreen; battery