Ideal for drummers, keyboard players or anyone requiring hands-free operation, the ATM73a features a comfortable, unobtrusive headband design with side-of-mouth pickup. Its belt-mounted power module operates on battery or phantom power.
-
Ideal for drummers, keyboard players or anyone requiring hands-free operation
-
Comfortable, unobtrusive headband design with side-of-mouth pickup
-
Belt-mounted power module operates on battery or phantom power
-
Cardioid polar pattern improves isolation of desired sound source
-
Also available as ATM73cW - less power module; 55" (1.4 m) cable terminated with locking 4-pin connector for A-T UniPak™ wireless systems
Specifications
-
Element: Fixed-charge back plate, permanently polarized condenser
-
Polar Pattern: Cardioid
-
Frequency Response: 40-15,000 Hz
-
Low Frequency Roll Off: 80 Hz, 18 dB/octave
-
Open Circuit Sensitivity: PHANTOM: -55 dB (1.7 mV) re 1V at 1 Pa BATTERY: -56 dB (1.5 mV) re 1V at 1 Pa
-
Impedance: PHANTOM: 200 ohms BATTERY: 270 ohms
-
Maximum Input Sound Level: PHANTOM: 146 dB SPL, 1 kHz at 1% T.H.D. BATTERY: 132 dB SPL, 1 kHz at 1% T.H.D.
-
Dynamic Range: PHANTOM: 111 dB, 1 kHz at Max SPL BATTERY: 97 dB, 1 kHz at Max SPL
-
Signal to Noise Ratio: 59 dB, 1 kHz at 1 Pa
-
Phantom Power Requiremens: 11-52V DC, 2 mA typical
-
Battery Type: 1.5V AA/UM3
-
Battery Current Life: 0.4 mA / 1200 hours typical (alkaline)
-
Switch: Off, on-flat, on-roll-off
-
Cable: 4.6' (1.4 m) long (permanently attached to microphone), 0.10" (2.6 mm) diameter, 2-conductor shielded cable with TA3F-type connector
-
Accessories: AT8531 power module; AT8128 windscreen; AT8125 windscreen; battery