AT AE2500
Najboljši mikrofon za ozvočenje bas bobna na trgu.Revolucionarni dual-element design.Dva elementa v enem ohišju (kondenzatorski in dinamični element).Dinamični element odlično reproducira agresivni attack opne bas bobna, medtem ko kondenzatorski element pobira tonske karakteristike ohišja bobna.Oba elmenta sta fazno optimalno usklajena, kar je z dvema, posamično postavljenima mikrofonoma praktično nemogoče.Robustno ohišje zagotavlja dobro zaščito pred fizičnimi poškodbami.Vgrajeni preklopnik 80Hz in +/- 10 dB.V kompletu z 5m kabla.
The ultimate kick-drum mic, the Artist Elite AE2500 dual-element instrument microphone features cardioid condenser and dynamic capsules combined in one housing. The dynamic element delivers the aggressive attack of the beater; the condenser captures the round tonalities of the shell. Two layers of resistive mesh form multiple densities over the dynamic element's side-entry ports, exercising precise control over the time at which off-axis signals arrive at the diaphragm. The condenser diaphragm is optimally tensioned and aged for long-term consistency and stability.
-
Revolutionary dual-element design represents a ground-breaking transducer achievement
-
Two elements (condenser and dynamic) are enclosed in a single housing
-
Dynamic element delivers the aggressive attack of the beater while the condenser captures the round tonalities of the shell
-
Elements are positioned in a perfect phase relationship, something practically unachievable with two separate microphones
-
Robust design for enduring dependability on the road
-
Integral 80 Hz HPF switch and 10 dB pad on condenser element
-
Includes isolation clamp for shock protection, secure mounting and easy positioning
-
Includes a 16.5' (5 m) cable (5-pin XLRF to two standard 3-pin XLRM connectors) for separate control over each element
SPECIFICATIONS
-
Polar Pattern: Cardioid
-
Frequency Response: 20-17,000 Hz (condenser) 30-10,000 Hz (dynamic)
-
Low Frequency Roll Off: 80 Hz, 12 dB/octave (condenser)
-
Open Circuit Sensitivity: -51 dB (2.8 mV) re 1V at 1 Pa (condenser) -54 dB (1.9 mV) re 1V at 1 Pa (dynamic)
-
Impedance: 100 ohms (condenser) 600 ohms (dynamic)
-
Maximum Input Sound Level: 148 dB SPL, 1 kHz at 1% T.H.D. (condenser); 158 dB SPL, with 10 dB pad (nominal)
-
Dynamic Range: 124 dB, 1 kHz at Max SPL (condenser)
-
Signal to Noise Ratio: 70 dB, 1 kHz at 1 Pa (condenser)
-
Phantom Power Requiremens: 11-52V DC, 3 mA typical (condenser)
-
Weight: 13.8 oz (390 g)
-
Dimensions: 6.50" (165.0 mm) long, 2.17" (55.0 mm) maximum diameter
-
Output Connector: Integral 5-pin XLRM-type
-
Cable: 16.5' (5 m) dual shielded, 8-conductor cable, 5-pin XLRF-type connector at microphone, two 3-pin XLRM-type output connectors
-
Accessories: AT8471 isolation clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch